ShopReady Cabinets Standalone · 37 s · narrated, with captions
A hinge from the Hardware Catalog
A base cabinet is picked, the Hardware Catalog is opened from its Doors card, a hinge is found by typing its model number, its figures are read, and it is put on the cabinet. Back in the Studio the Doors card of that cabinet names the hinge.
This is one part of a longer film
More in Design
Clip · 37 sA new cabinet: pick its type, type its sizes
On an empty job, New Cabinet shows a base, a wall and a tall cabinet as each type is picked. In Size and Type the width is typed in feet and inches, the height with a fraction and the depth in millimeters; the preview follows each one. Place Cabinet adds it to the job.
Clip · 38 sA trash pull-out that fits the cabinet
One 18 inch base cabinet. The Trash Pull-out tool is opened from the cabinet's Design tiles, the kind of front is chosen, the tool names the unit that fits the cabinet, Add to cabinet sets it up, and back in 3D the front slides out with the bins.
Clip · 38 sDoors, drawers and front layout
One 36 inch base cabinet. Front Layout changes it from two doors to a drawer over doors, to a stack of drawers and back; the Doors card changes the door style to slab and back to rail and stile; then a door and the drawer are opened with a double-click and closed again.
Clip · 52 sDraw tools and the lathe
On an empty job the Draw tools make a hall table: a board is drawn with a click and a typed size (60 by 30), lifted to table height, and four tapered legs and aprons are built under it. Then the lathe is opened, a turned leg is picked, and Turn it shows it cut from the square blank, with its cut-list size.
Clip · 52 sHardware drilling: pull, hinge and plate holes on the router
One base cabinet with slab doors cut from sheet stock. In its Doors card, Hardware drilling is opened, pull holes are chosen and hinge plate holes are ticked. In CNC Machining, looking down on the sheet, one door is played on the virtual CNC with its pull holes and hinge cups, and a cabinet side is shown with its hinge plate holes.
Clip · 28 sOpen every door and drawer
The sample kitchen in 3D: every door swings open, every drawer pulls out, and the kitchen is turned to look inside the cabinets.