Skip to the page
ShopReadyCabinetsDraftFieldToolbeltCompare

ShopReady Draft 3D · 35 s · narrated, with captions

Sliced, and looked into layer by layer

A plate with a hole stands on the printer's bed. Slice works out its fifty layers, and the Layer slider is dragged down and back to see the walls, the fill and the hole as the printer will lay them.

Before thisPrinting the box and its lid: from the bed to the saved program

This is one part of a longer film

Film · 1:54

Printing: from the model to the printer's bed

Printing: how a part is sliced, looked into layer by layer, and saved as a print program.

More in Printing

Clip · 1:22

Printing the box and its lid: from the bed to the saved program

The Print tab sets the box and its lid out on the printer's bed. A printer is picked from the list, the lid is laid on its flat top so that nothing hangs in the air, and Slice works out 200 layers. The time, the weight and the length of filament are read off, the Layer slider is dragged down to look inside, and the program is saved as a.gcode file.