ShopReady Draft 2D · 58 s · narrated, with captions

A carved relief, part 3 of 4: Shape it, and turn it over

Shape it... on the relief in the CNC job brings the picture window back with the same picture and settings. Steepness is tried, What stands high is set to The dark parts so the head becomes a mold, Smooth is raised, and Change the relief swaps the relief on the drawing: same rectangle, same bits, same job.

Before thisA carved relief, part 2 of 4: Two bits NextA carved relief, part 4 of 4: A 3D model, and the check

This is one part of a longer film

Whole project · 5:04

A carved relief: the whole project

A relief carved from a depth picture, start to finish in four chapters. The picture is opened in the picture window, carved as a Relief, shaped with Flat background, Fade the edge, Fullness and Depth, and placed; the CNC job roughs it with an end mill and carves it with a tapered ball nose, with the passes, ridges, depth and run time in plain sight. Shape it brings the picture back to turn the head into a mold, a 3D model is added beside it from an STL file, and the simulator carves the whole job and finds nothing to fix.

The rest of this project

Chapter · 1:20

A carved relief, part 1 of 4: Shaping the picture

Chapter · 1:26

A carved relief, part 2 of 4: Two bits

Chapter · 1:52