ShopReady Draft 2D · 1:42 · narrated, with captions

Round work, and a cabinet laser, part 1 of 2: A band of lettering for a tumbler

A band of lettering is drawn flat on the Engrave layer: a line of capitals 10 mm high with a thin rule under and over it, 208 mm long. It is turned to stand on end, because on a rotary what goes up the drawing is laid round the work. In the Laser job the layer is made a Fill, and Round work on a rotary is set for a tumbler 76 mm across held in a chuck: the window first warns that the band is longer than a smaller work is round, then says the work is 238.76 mm round, so the band fits.